Shop
The products we offer can be found here, including custom fitted thumb rings and accessories.
Bow Display - Wall-Mounted
Bow Display - Wall-Mounted
Showcase your bows without damaging your walls!
This sleek, minimalist bow display puts your bows front and center, where they belong. The clean, low-profile design can fade into the background, or add a subtle pop of color with the accent covers, letting the sinuous curves and craftsmanship of your equipment take the spotlight.
Each set includes two wall mounts that work together to cradle two bows horizontally (or one bow plus arrows, or simply a collection of arrows—your choice). The mounts attach using 3M Command Strips, so there's no drilling, no anchors, and no holes in your wall.
What's Included:
Two wall mounts
Two accent covers
Two large 3M Command Strips (pre-selected for compatibility)
Specifications:
Hook depth: 38mm (accommodates slightly wider bow limbs if needed)
Hook spacing: 25mm
Rated weight capacity: 10 lbs (5 lbs per mount)
Installation Instructions
What You'll Need: A clean cloth and your wall
Choose your location and lightly mark where each mount will go. Clean both spots thoroughly—remove any dust, dirt, or debris for maximum adhesion.
Examine the adhesive strip. One side is labeled "Wall," the other side reads "Command" with a downward-pointing arrow on the pull tab.
Apply to the mount first. Peel the "Command" side and press it onto the back of the wall mount with the pull tab pointing down toward the dovetail slot.
Mount to wall. Peel the "Wall" side and firmly press the mount against your marked spot. Hold for 30 seconds.
Slide the accent cover into the dovetail slot to conceal the pull tab.
Repeat for the second mount.
Your display is ready to use.
To Remove: Slide off the accent cover, grasp the pull tab firmly, and pull straight down parallel to the wall until the adhesive releases. Apply a new strip to reinstall elsewhere.